3 Easy Steps to Beautify Wood Surface

3 Easy Steps to Beautify Wood Surface

Modern day furniture can be very expensive and if you have done interior work at your home or workplace. We all like shiny smooth space saving furniture, specifically so when its custom made. But as you realise, furniture cleaning can be very exciting, particularly for the home furniture. Everything in our house or workplace, need right care and cleaning being the vibrant task. If you are not cleaning the furniture correctly, then it’s going to lose its fascination sooner or later. But thankfully, there are smarter methods to keep wooden furniture clean and glossy.

3 Easy Steps to Beautify Wood Surface

Worth knowing about the way to preserve wooden furniture clean and polished simply. Read here to know about:

Prepare the Wood

Ensure the wood is ready to stain by first sanding it gently in the direction of the grain with a medium grit sandpaper, trailed by one with a fine grit.

Tip: If the wood is gentle or spongy, then after sanding, utilize a pre-stain wood conditioner to avoid blotching. If you are utilizing a water-based stain, make sure to utilize a pre-stain wood conditioner, regardless of wood species.

Remove Old Polish

Knowing how to clean old wood furniture that has eras for old buildup of polish that will help you to revive an antique. Steep two tea bags in boiling water. Let the tea cool to room temperature, take a smooth fabric, wring it out in the tea until its damp and wash the wood.

Tip: The tannic acid from the tea is perfect for maintaining wood. You’ll be amazed to see how the wood will shine.

Select and Apply a Wood Stain

Picking a wood stain is a matter of special preference and DIYers have a variation of stains to pick from. Stains such as Rust-Oleum Varathane Premium Fast Dry Wood Stains enable you to pick a stain color that coordinates with your decor.

Tip: Before staining, always test the selected stain on a hidden part of your piece, or on scrap wood that matches the wood types of your venture.

Add a Clear Protective Finish

After staining, usually top coat with Varathane Crystal Clear Water Based Polyurethane for Interior. It will defend the wood against water, household chemicals, food stains and every day wear.

Tip: To reduce brush marks and bubbles, "tip off" every section of your venture before the finish dries. You need to hold the brush at a 45-degree angle and casually run the bristles over the complete length of wood.

Things to Remember

  • Finishes comprise chemicals that may be dangerous if used without correct safety precautions.
  • Always wear lightweight surgical gloves to defend the skin and defensive glasses to protect the eyes.
  • Some finishes emit risky vapors, so work outdoors or in a well-ventilated area with a fan for circulation.
  • You need to wear a charcoal respirator when working with oil-based finishes.
  • Keep that in mind that not to work near a gas furnace, wood-burning stove or other flame.
Back to blog