Automotive

Rust-Oleum Automotive Peel Coat - Peelable Rubber Coating Spray Paint

Product Code 276779
Availabilityin stock

Rs. 1,648.00 Rs. 2,060.00
per 
Tax included. Shipping calculated at checkout.
Hurry! Only 497 left in stock.
/count/ sold in last /time/ hours
Add to Compare Ask about product

Fill up the form if you have any question


Rustoleum Peel Coat Spray Paint is perfect for you if you are thinking to customize your vehicle’s look (car or bike or truck or any other) at home! Basically, these are easily removable rubber coating sprays available in aerosol spray cans so that you can do the job easily. “Easily removable”, means you can remove the existing peelable coating and apply in other different color whenever you want. You can use it for hoods, rims, mirror covers, and more. In other words, these sprays can be used on plastic, metal, glass, chrome, and other surfaces. These paints are available in several colors such as matte black, gold, matte yellow, and more. Hence, you can do endless customization. Apart from customizing, peel coat also protects lower vehicle body like bumper from road debris.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Rustoleum Peel Coat Spray Paint

  • Peelable – Just remove it whenever you want.
  • Available is several colors.
  • Long Lasting – vehicle can go through automatic or manual wash.
  • Protects lower vehicle body from scratches that occur due to road debris.
  • Excellent coverage.

Best Practices to Apply Rustoleum Peel Coat Rubber Coating Spray



Follow the below Instructions for Best Results

Appropriate Conditions to Spray: Use outdoors or in a well ventilated area such as an open garage. Use when temperature is between 50-90°F (10- 32°C) and humidity is below 65% to ensure proper drying. Do not apply to surfaces that, when heated, exceed 200°F (93°C) or galvanized metal. Avoid spraying in very windy and dusty conditions. Cover surrounding area to protect from spray mist.

Surface Preparation: Wash the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and dry with a clean cloth. Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces.

Application/Spraying: Shake can vigorously for one minute after the mixing ball begins to rattle. If mixing ball fails to rattle DO NOT STRIKE CAN. Contact Rust-Oleum. Shake often during use. Hold can 8-12" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface and in motion while spraying. Apply 4 or more light coats to build desired coating thickness, followed by one medium coat to achieve a smooth final film. Allow the coating to dry slightly (about 5 minutes) between coats. More coats will result in a thicker coating which is easier to remove when desired. Allow the coating to cure for 24 hours before washing. Do not use near open flame.

Properties of Rust-Oleum Automotive Peel Coat Spray Paint

Brand Rust-Oleum
Resin Type Styrene Blocked Copolymer
Pigment Type Varies with color
Solvents Blend of Acetates, Methyl Ethyl Ketone, Naphtha
Weight 312 Grams
Recommended Dry Film
Thickness (DFT) Per Coat
0.5-1.0 mils (12.5-25µ)
Practical Coverage 
at Recommended DFT
8 sq.ft./can
Dry Times at 70-80°F 
(21-27°C) and 50% Relative Humidity
20 min to touch and re-coat
Dry Heat Resistance 200°F (93°C)
Shelf Life 2 years
Flash Point -156°F (-104°C)
Safety Information For additional information, see MSDS
Technical Data Sheet Click here