Rust-Oleum Automotive High Heat Spray Paint is a tough enamel aerosol coating that is mainly manufactured for the automotive high-temp surfaces such as silencer, engine, exhaust manifolds, headers, etc. The high-heat enamel spray paint is ideal for all vehicle engine surfaces including cars and bikes. Also, it is suitable for other automotive parts subjected to intermittent heat up to 1093°C or 2000°F. The product is offered in a wide range of color palette so that it can match your existing paint scheme. Also, the Rustoleum high temp spray paint comes with an advanced spray facility that enables you to comfortably spray at any angle and even upside down in those difficult to reach areas.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Keep In Mind: Keep out of the reach of children. Harmful if inhaled or swallowed. Never use this product near any ignition sources.
#Step 1: Surface preparation is essential to ensure quality outcome. You can use the following for surface preparation.
1) Wash the surface thoroughly with a commercial detergent, or other suitable cleaning methods to remove all dirt, grease, oil, salt and chemical contaminants.
2) Rinse with fresh water.
3) Let the surface dry thoroughly.
4) Remove loose paint and rust with a wire brush or sandpaper.
5) Scarify the surface by sanding to create a good surface profile.
#Step 2: Even if surface pre-treatment are carried out appropriately, improper environmental circumstances might affect the paint results. So you must check environmental conditions before spraying the paints over the object. Take care of the following.
1) Ensure a proper ventilation in the paint area.
2) The temperature between 50°F (10°C) and 90°F (32°C) is suitable for applying the paint.
3) Humidity less than 85% is effective for letting proper dry the painted surface.
4) Do not use on metal directly exposed to flames.
5) Avoid very windy and dusty condition.
6)Cover surrounding area to keep safe from spray mist.
#Step 3: Consider the below mentioned instructions to avoid encounter with sudden injuries.
1) Shake aerosol cane vigorously for one minute and make sure mixing ball begins to rattle.
2) If not, “do not strike spray-can. Contact Rust-Oleum”.
3) Keep the cane in motion while spraying.
4) Hold the can upright 10-16” from the surface and spray in a steady back and forth motion.
5) Apply 2 or more light coats a few minutes apart to avoid runs and sags.
6) Do not use near open flame.
| Brand | Rust-Oleum |
|---|---|
| Resin Type | Silicone |
| Pigment Type | Varies with Color |
| Solvents | Aromatics and Ketones |
| MIR | 1.4 Max |
| Practical Coverage at Recommended DFT |
6-10 sq. ft./can |
| Fill Weight | 312 Grams and 340 Grams |
| Recommended Dry Film Thickness (DFT) Per Coat |
0.5-1.0 mils (12.5-25µ) |
| Dry Times at 70-80°F (21-27°C) and 50% Relative Humidity |
30 min to touch re-coat at any-time after 30 min |
| Dry Heat Resistance | 2,000°F (1,093°C) |
| Shelf Life | 3 years |
| Flash Point | -156°F (-104°C) |
| Color | Clear, Flat Aluminum, Flat Black, Flat Red |
|---|
We want you to be happy with your purchase and we apologize if it is not. For whatever reason that you are not satisfied, we would be most happy to provide exchanges and returns for all items purchased from us if the following conditions are met.
All exchanges and returns would need to be raised within 10 days of the invoice date for Singaporeorders, and 20 days for overseas orders. For local deliveries, there is an option to exchange at any of our boutiques within Singaporeor through our online portal at www.company.com. All requests for returns however, would need to be strictly made online at www.company.com for both local and overseas deliveries.
All exchanges and returns would need to be raised within 10 days of the invoice date for Singaporeorders, and 20 days for overseas orders. For local deliveries, there is an option to exchange at any of our boutiques within Singaporeor through our online portal at www.company.com. All requests for returns however, would need to be strictly made online at www.company.com for both local and overseas deliveries.
No products in the cart.
