Transform Your Wheel Rim Color In Few Easy Steps

Transform Your Wheel Rim Color In Few Easy Steps

Ever wonder what those stunning car rims or custom truck wheels will look like on your ride? Wonder no more! Rust-Oleum’s car or truck peelable primer shows you exactly how the wheels of your dreams will look on your ride. It's easy to use. Rust-Oleum Peel Coat Spray Paint is ideal for you if you are thinking to modify your vehicle’s look (car or bike or truck or any other) at home! Basically, these are easily removable rubber coating sprays available in aerosol spray cans so that you can do the job easily. “Easily removable”, implies you can remove the existing peelable coating and apply in another different color whenever you want.

With Rust-Oleum's Peel Coat Spray Paint, it’s easy and affordable to customize your rims. Here’s how you can paint your rims in a few steps-

Step 1: Clean the rims with soapy water and dry it along with that.

Step 2: Tape off any areas you do not want to paint. Shake Peelable Primer vigorously for one minute after mixing ball starts to rattle.

Step 3: Over a drop cloth, hold the Peelable Primer can 8-12” from the rims and spray in a steady back-and-forth motion, slightly covering each stroke until the point that the whole zone is secured.

Step 4: Apply 3 or more coats of primer, holding up around 2-5 minutes between coats. After applying the last coat, immediately peel off the painter's tape to make sure clean edges.

Step 5: Let the Peelable Primer coating a chance to dry for at least 4 hours before applying the colored spray paint.

Step 6: Shake the can of spray paint for one minute after the mixing ball rattles and apply paint to the rims the similar way the primer was applied. Let dry about 20 minutes between coats and apply at least 2 or more coats of spray paint for full coverage.

Step 7: Unmask after a few minutes of final coat, then let all paint dry for no less than 4 hours before use. TIP: Remove Peelable Primer within 6 months for best results.

Back to blog