How to Add Removable Racing Stripe To Your Car

How to Add Removable Racing Stripe To Your Car

Gone are the days, when you used to take your car to a professional auto body shop for painting or customization. But now the time has changed with Rust-Oleum Automotive paint products that are available in the market for you to simply DIY painting your car at your convenience, anywhere!! Anytime!!

Well, if you are one of the people, who love to customize his own car then you will undoubtedly love this article. Today, we’ve come up with four simple steps of how to add a removable racing stripe to your car, take a look!! Also, if you want to know about how to tint your car’s tail lights, you can click here!!

Materials You’ll Require

  • Painter’s Tape
  • Masking Paper
  • Latex Gloves
  • Drop Cloth
  • Rust-Oleum Peel Coat

Before You Start:

 work in a proper ventilated area

Before to start spray paint, find a place with excellent ventilation, dust-free environment and most importantly enough room to work around the vehicle that you are going to paint. Place a drop cloth to protect the floor from overspray.

Step 1: Preparation

 Surface Preparation

After finding the place now is the time to prepare your vehicle for spray paint. First of all, clean the surface of the hood using water and soap and let it dry thoroughly. Once dry, mask off the area around the centre portion of your hood using painter’s tape and masking paper to protect it from possible overspray. Also, keep in mind to wear gloves and a mask while spray painting, especially if you’re spraying in a confined space like a garage.

Step 2: Spray Paint the Surface

Read the instruction carefully Before starts spraying

Once done with general preparation, you can spray paint your vehicle. First, read the instruction carefully. And now, shake the aerosol-cane of Rust-Oleum Peel Coat vigorously for a minute until the mixing ball begins to rattle. If mixing ball fails to rattle, “Do not strike spray-can and contact Rust-Oleum.” Next, hold the spray-cane 8-12” away from the surface and spray first light coat in a consistent sweeping motion. Apply four or more additional coats, with the gap of 10 minutes between each coat. The more coats you apply, the easier it will be to peel them later.

Step 3: Finish

 remove the painter s tape and masking paper from the hood

For clean lines, you need to remove the painter’s tape and masking paper from the hood, immediately after finishing your last coat. Then, let the painted surface dry completely or for at least two hours before taking it out for a spin.

Step 4: Remove

 slowly rub one edge to remove peel coat

The best thing about this spray paint that it can be removed easily whenever you want. To remove, slowly rub one edge of the paint until it starts to peel up. Also, you should expect the coating to peel off in large pieces. Well, for simple and easy removal, it is recommended peeling your tail-lights within six months of application. 

Have a look at the featured video also!!

Back to blog